Features:
1. ANBEI 995 Single-component silicone adhesive, neutral-based, room temperature curing.
2. Has excellent resistance to weather aging.
3. Has good adhesion, without primer under the usual circumstances. After curing for most building materials can produce good adhesion.
4. This product provides a standard color (balck), we can also be requested to provide the user with other colors.

Main use:
1. For the structural bonding of glass curtain wall assembly.
2. Hollow glass structural adhesive seal.
3. Many other uses.

Construction Requirements:
1. Construction of the substrate surface should be cleaned before.
2. After cleaning the surface of building materials should be within one hour construction, construction to keep the surface clean and dry before, to avoid further contamination.
3. Using a manual or pneumatic dispensing gun glue, the mortar filled joints, and then squeezed with a scraper and further inward, so that completely filled mortar joints, leaving no gaps.
4. To ensure the silicone sealant around the perfectly clean lines, near the site in the interface can be highly impractical to use tape, but tape will not touch the surface of the construction, repair work is completed shall immediately clear the modesty tape.

Note:
1. Uncured sealant and sealant curing process will release volatile compounds, long-term inhalation of high concentrations of volatile Dumping hazardous to health, therefore, the workplace should pay special attention to maintain good ventilation.
2. Uncured sealant should not be prolonged direct contact with skin, if they inadvertently enter the eyes, rinse immediately with plenty of water, if necessary, and then ask the doctor to check.
3. Cured sealant will not release harmful substances, it would not jeopardize the skin.

Storage period:
Should be stored in a cool dry place, storage temperature should be lower than 27 ℃, storage period of 9 months.
Meet the national standard: GB6776-2005